全自动端子压著扭线沾锡打圈机（高速）
规 格
| 电源 |
AC220V、380V 50、60Hz三相 |
| 功能 |
尺寸切断、单端压着、单端剥皮、双端剥皮、单端半剥、双端半剥、单端沾锡、单端打圈、单端扭线。 |
| 操作方式 |
分解动作、单行程动作及自动 |
| 速度 |
3,300条/小时（300mm以内） |
| 线材规格 |
AWG#22～28（标准） |
| 空气压力 |
5～6kgf/cm2(需使用清洁干燥空气) |
| 压着能力 |
1.8Ton（伺服端子） |
| 切断长度 |
单边打圈PVC长度31～9.999mm（标准） |
| 切断精度 |
变动范围1mm+切断长度*0.2%以下 |
| 剥皮长度 |
NO.1、NO.2侧0～6mm |
| 剥皮深度 |
100步2mm（1步＝0.02mm） |
| 检出装置 |
电线过载、电线有无（电线接头）、预送上点、定寸送线、剥皮不良、冲模不良、端子有无、端子过载、气压低下 |
| 本体尺寸 |
1,890L*1,500W*1,900H mm |
| 重量 |
约650kgs |
Full Automatic Terminal Crimping Soldering Bend Circle Machine (High speed)
Specifications
| Power supply |
AC220V/380V 50/60Hz 3ogases |
| Capacity |
Cutting wire,terminal on one end,strinpping on one end,stripping both ends,crimping on one end,crimping both ends,half-stripping on one end,half-stripping both ends,soldering on one end ,bend circle on one end,twister on one end. |
| Operation method |
Single cycle and auto(Continuous) |
| Speed |
3300pcs/hr(300mm) |
| Wire size |
AWG#22～28(Standard) |
| Air pressure |
5～6kgf/cm2 |
| Crimping force |
1.8Ton(Servo motor Terminal crimping machine) |
| Cut length of wire |
Bend circle another end ,PVC length 31mm ～99999mm(Standard) |
| Cutting acccuracy |
Variation within 1mm plus 0.2% |
| Strip length |
NO.1、NO.2stripping side 0～6mm |
| Strip deep |
100 action 2mm（1action＝0.02mm） |
| Detectors equipped |
Wire overload,wire load (wire joint),in advance give on point of,fix inch give line,trip miss,crimp miss,terminal load,terminal overload,air presser low. |
| Dimensions |
1,890L*1,500W*1,900H mm |
| Weight |
Approx.650kgs |
|
