全自动端子压著机（双头）
规 格
| 功能 |
电线尺寸切断、单端剥皮、双端剥皮、单端半剥、双端半剥、单端压着、双端压着、单端扭线（需另选购扭线器） |
| 电源 |
AC220V、380V 50、60Hz三相 |
| 操作方式 |
手动、单行程动作以及自动（连续） |
| 速度 |
3400条/小时（300长以内） |
| 切断长度 |
PVC胶长30mm～9,999mm标准 |
| 切断精度 |
变动范围1mm+切断长度*0.2%以下 |
| 剥皮长度 |
NO.1、NO.2侧0～4mm |
| 剥皮深度 |
100步2mm（1步＝0.02mm） |
| 电线规格 |
AWG#24～AWG#34（标准） |
| 空气压力 |
5～6kgs/cm2(需使用清洁干燥空气) |
| 端子压着能力 |
1.8Ton（伺服端子） |
| 检出装置 |
电线有无、电线过载、电线接头、剥皮不良、冲模不良、端子有无、端子过载、气压低下 |
| 本体尺寸 |
1,450L*1,100W*1,900H mm |
| 重量 |
约450kgs |
Full Automatic Terminal Crimping Machine (Twin Heade)
Specifications
| Capacity |
Cutting wire,stripping on one end,stripping both ends,half-stripping on one end,half-stripping both ends,criping on one end,crimping both ends,twister on one end(optional equipments twister) |
| Power supply |
AC220V/380V 50/60Hz 3 phases |
| Operation method |
Manual,single cycle and auto(Continuous) |
| Speed |
3400 pcs-hr(300mm) |
| Cut length of wire |
PVC length 30mm ～9.999mm(Standard) |
| Cutting accuracy |
Variation within 1mm plus 0.2% |
| Stripping length |
NO.1、NO.2 Crimping side 0mm～4mm |
| Stripping depth |
100 action 2mm (1 action=0.02mm) |
| Wire size |
AWG#24～AWG#34(Standard) |
| Air pressure |
5～6kgs |
| Crimping force |
1.8Ton(Servo motor Terminal crimping machine) |
| Detectors equipped |
Wire overload,wire load,terminal overload,terminal load,strip miss,crimp miss,airpresser low,Wire joint |
| Dimensions |
1,450L*1,100W*1,900H mm |
| Weight |
Approx.450kgs |
|
